Simple Ways to Build a Small Backyard Patio

Building just a small backyard with simple patio design ideas is much easier than you might imagine. No matter how big your backyard is, you can make many types of patios that would be the perfect place to relax and unwind. How do you create this oasis? To find out the answer, let’s take a look at the simple ways to build a small backyard patio down here.

Simple Ways to Build a Small Backyard Patio

Prepare the Tools

You will discover the basic tools and materials you will need to perform most patio tasks. To begin with, you need a tape measure and double or series wooden stakes. It would be best if you also had leveling sand, crushed stone or pea gravel, paver stones, and the mallet. Garden hose, shovel, tamper, broom, and diamond blade saw are also needed. A blade saw can be used to cut rocks to specific sizes and is not a major purchase, but if you have decided on a precise-shaped patio project, it is simple to rent them from the regional home improvement store.

Set the Place of Your Patio

it is essential because setting a correct place of your backyard patio will prevent you from getting baked in the sun and cool in the shady area. You should keep in mind that the patio placement is vital. It would be best if you thought of the time of day when you use it the most and where the sun is likely to be. It depends on your taste; after all, it is a small getaway.

Measure Off the Dimension of Your Patio

The next step is to choose the distance you want. Do you want enough room for two seats and a small table, or do you want the whole family to sit? Mark the area with a couple of pegs and a string, or even by outlining the pot. You should place the planned furniture in the marked spot to make sure you have the space you need.

Buy Paving Stones

There is a huge selection of shapes and colors of paving stones. The staff at the center will be able to help you determine exactly how many you need, based on the size you’ve given them. You’ll also need to buy some sand to get a filler and some crushed stone or gravel for the base. The store staff can advise you on quantities, but it’s almost always better to buy a small amount extra.

Dig Out the Area

You will need to bury the pavers’ thickness along with the sand and base fill (gravel or crushed stone). It’s best to go a little deeper than your estimate; you can always level with backfill (remember to always check with the city before digging to see if there are any underground wires to protect yourself).

Compact the Soil and Fill the Area

Then, you need to fill the crushed stone or the pea gravel. It’s essential to keep a small slope away from the house to allow water to drain. A good guideline is about 1/2 inch per four feet. Next, you can continue by filling the area with leveling sand. You can compact the sand with the tamper. Finally, you will need another pair of hands to help you with this element.

Lay Your Pavers

If it’s an irregular outline, start at the center and work your way up to the outer edges. If it’s rectangular or square shapes, start by putting them around all four sides and work invisibly. Secure them in place with the hammer as you go. Fix the plane and position of the stones so you don’t have to cut them. If you need to cut the gravel (crushed stone) in the last place. Spray the patio with water to wash it. Hey, you’re done.

Leave a Reply

Your email address will not be published. Required fields are marked *